Boot from that Linux OS, then choose the second "default" option from the boot loader menu. rEFInd should be able to find a Linux OS on the internal HD. Note that this does a byte-to-byte copy, so using a small USB drive if you can to save time. dd if=/dev/rdisk2s1 of=/dev/rdisk1s1 bs=4m. 39.99 33.99 Installation Check our Easy Install guide for installation instructions Currently installed drive Free space: 171.71 GB Used space: 60.57 GB (26.1) Total space: 232.28 GB New Crucial MX500 SSD Free space: 451.43 GB Used space: 60.57 GB (11. Helped a friend upgrade her Late-2012 Mac Mini with additional RAM and this Crucial SSD. to now turn to some crucial issues for the Colorado River Storage Project ( CRSP ). Use dd to copy the bootable USB drive to the internal HD, e.g. Upgraded my Mid-2010 Mac Mini from its original HD to this SSD. Careers, Highly competitive pay and benefit package, Paid training with opportunities to advance, Clean, professional work environment, Full and part time.Erase the internal HD with Master Boot Record and FAT32 file system.This USB drive contains both syslinux and Crucial's firmware (which I think is in boot2880.img) Supported drives: P1, P2, P5, MX series, BX series. Use UNetBootIn to create a bootable USB drive from Crucial's firmware updating ISO. Storage Executive optimizes and updates your Crucial SSDs on Microsoft Windows computers.The main problem was that iMac refused to boot from an external USB drive, even using rEFInd. The iMac does have its original internal HD, which turns to be crucial for solving the problem. I was trying to upgrade firmware for a Crucial m4 256G SSD on a mid-2012 27" iMac. After a short installation, the Crucial Storage Executive Tool. Not sure if you have resolved the issue, but I'll explain how I did it here in case it's useful for other people. The Crucial Storage Executive Tool download can be found on the linked Crucial support website. But how do I know if that DMG is up-to-date, reliable, and trustworthy? Even if it is, that route seems unnecessarily complicated. One part recommends using rEFIt-Syslinux.dmg_.zip. I've also read Updating firmware on Macs without a superdrive too. I tried two different sticks to reduce the chances that it was a hardware issue. The steps seemed to work, but the resulting USB stick would not boot. I've have waded through a muck of articles about how to copy an ISO to a bootable USB stick, but I have not found a solution that works and that I'm comfortable trying.įor example, I read How do I burn an ISO on a USB drive on Mac OS X? and followed the steps. (As of this writing, the latest is Crucial_m4_040H-04-00.zip.) If necessary, I will reluctantly use a commercial tool. I hope that means using only built-in Mac software, such as Disk Utility and Terminal for commands. I want to start with the Crucial SSD Firmware Update and copy the ISO to a bootable Mac USB stick, using a minimal set of tools.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |